Wardrobe in addition to mildew

If you buy a wardrobe with unguaranteed quality, you may encounter mildew in your home wardrobe. Once the wardrobe in your home is moldy, it must be disposed of in time to prevent the mold from becoming more serious, causing damage to the wardrobe and preventing the environment at home. influences. Jin Fuli Furniture http://jfl.cnjiaju.com/Share

Then, when the wardrobe is mildewed, what should I do? The wardrobe is free of mold and small tricks, so that you can no longer worry about maintaining the wardrobe.
First, when the mold in the mold, you must first pay attention to clean the moldy place, generally can be wiped clean with a dry paper towel, or brush with a dry brush, clean the moldy place. If the brush is not clean, wipe it with a damp cloth, and it is often very convenient to remove the mold spots.
Second, if you find mold, in addition to cleaning the mold with a cloth, we need to brush the varnish again, so that it can effectively prevent further mold. Moldy is mostly caused by paint problems, so we can also use the rainforest to clean, then wipe with a clean cloth.
Third, the air is damp and easy to mold, then we can put some lime in the home, not only can effectively prevent moisture, but also have the effect of disinfection. If the moisture in the closet is too heavy, you can put a tungsten light bulb in the closet and open it when it is wet. It can effectively reduce the moisture in the closet and keep the closet dry.
Fourth, mold into our home, it will cause some respiratory diseases, in order to prevent this, you can put some desiccant in the closet, can absorb the excess water in the closet, make the wardrobe more dry. At the same time, we can put some orange peel in the closet, and also receive the effect of clear and environmental protection, and pay attention to the ventilation and ventilation of the window. After we have used the wet mop to finish the ground, we should also pay attention to the ventilation of the window.

Level Transmitters

Level transmitters are used in process industries to detect the level of fluids, liquids, powder. The Rosemount level transmitters feature non-contacting ultrasonic designs, which are built for use in hazardous environments. The Transmitter Shop (TTS) provides a wide range of level transmitters for harsh process environments.

Level Transmitters SOR level transmitters continuously sense the liquid level in tanks and deliver a 4-20 mA current proportional to the level. The current output can be connected to a programmable logic controller, computer, remote display or relay module to display and/or control the liquid level in the tank.

Level Transmitters,Hart Level Gauge,Wireless Level Transmitter,,Oil Diesel Level Sensor

Xi'an Lonn M&E Equipment Co., Ltd. , https://www.smartmeasurer.com