Clever PS version to dirty pen

PS version to the dirty is usually with a brush to pick up dirty water or dirty paste on the PS plate with a dirty stain on the place, and then wipe with a damp cloth. This method is not very convenient to operate. If you do not pay attention, the graphic will be removed and the PS version will be scrapped. I tried to change the watercolor pen to a dirty pen and got dirty on the PS plate. I achieved very good results. The specific methods are as follows: 1. Remove the watercolor pen (large) tip and refill, wash it to watercolor, then dry it, and put it back in the original place of the watercolor pen; 2. Insert the cleaned watercolor pen into the container. Go to the bottle of dirty water, after a period of time, make the dirty water infiltrate into the pen and pen cartridge. 3. Take out the watercolor pen penetrating the dirty water and dry it with a dry cloth; 4. Use it for a period of time. Then put the pen into the dirty water bottle to infiltrate the dirty water and continue to use it.

Using a dirty pen to change it is as easy as writing and drawing with a watercolor pen. Since the dirty water in the writing head flows out evenly, there will be no phenomenon that PS will be scrapped when the dirty water is spread to the graphic and text.

In addition, the writing head of the dirty pen is shaved or sharpened with a blade, and like a writing brush, it is easy to remove the dirty lines and stains immediately close to the graphic text and remove the dirt.