Clean high and low temperature test chambers make the dirt nowhere
In this issue of maintenance, we will introduce the most complete high and low temperature test box cleaning method, from parts to compressors, to give your high and low temperature test chamber a "head to toe" baptism!
If the high and low temperature test chamber casing is dirty, you want to keep the outer panel bright, or make the eclipsed panel re-glazed. This is usually achieved by using a wax spray. If it is to deal with the dirt of the outer casing, use a soft cloth to wipe a small amount of toothpaste slowly. If the dirt is more stubborn, use more toothpaste and wipe it repeatedly. The high and low temperature test chamber can be quickly restored. Because the abrasive contained in the toothpaste has a strong decontamination ability.
After a period of use, the high and low temperature test chamber will produce some stains inside. Like the hard-to-handle slits on the door of high and low temperature test chambers, the best cleaning tools are the commonly used toothbrushes. In the high and low temperature test chambers and laminates, these can be wiped with diluted bleach, which can remove stains and sterilize.
In addition, there is another place that can not be ignored is the compressor and condenser of the important refrigeration components of the high and low temperature test chamber. After long-term use, it is likely to be stained with dust, which will affect the heat dissipation. Therefore, it needs to be cleaned regularly, otherwise it will lead to the use. The life is shortened, and the cooling effect of the high and low temperature test chamber is weakened. Be sure to pay attention to the cleaning of these important electrical appliances. Always turn off the power before cleaning. Use a soft dry cloth when cleaning.
Recoil Springs,Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring
Professional Recoil Springs manufacturer is located in China, including Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring, etc.
We are factory, we had made these products 15 years, we can give you good serve and quality. Hope to business with you!
Recoil Springs,Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring
Shenzhen Lanejoy Technology Co.,LTD , https://www.szlanejoy.com