Adhesive tension tester operation and installation method

Adhesive tension tester operation and installation method

Haida Instrument 400-071-1808/0769-89280808

1. How to install the operating program .

Exercise Make Process sequence Total There are six Text Member (BBB.BMP, CMDIALOG.VBX, MSCOMM.VBX, THREED.VBX , VBRUN300.DLL, Rally. EXE) 6 copy the files to the C root directory of all the electronic testing machine host computer, and then in the established under the root directory of C AA, BB, CC three empty folder, then "Rally. EXE" file created on the desktop (conventional factory before the company has operating procedures Installed ). Remember : This device can only use the operating procedures designed by the company , otherwise there may be accidents . Remember : This device can only use the company's design operating procedures , otherwise it may have an accident .

2. Power supply requirements : . Power supply requirements : AC 200 volts to 240 volts . Permissible instantaneous voltage fluctuations ± 2 volts , frequency 50HZ, power 1KW kilowatts ( if the voltage does not reach the above Requirements , please match online UPS).

3. Working environment: Working conditions: temperature range of 10 to 25 ° C and humidity range of 55 ~ 75% RH..

4. Power up .
1) Turn on the power of the speed controller 2) Turn on the power of the host computer , monitor , and printer
The procedure proceeds to operation 1) computer into Windows XP desktop, opening the power control devices. Start the testing machine running under Windows XP desktop Program, double-click the Rally program, enter the password: 10011, press the Enter key (Enter key) on the keyboard, enter the procedure 2) point "feature set" - "experimentally" - "classified material" selected experiments, method (see instructions) 3) and then point "parameter set" after predetermined parameters (see operating instructions), point "return" and then "test" 4) clip on the test piece, and down to adjust the distance limit, first point "reset" 5) the device starts operation, and a display test curve; after the test, the device automatically stops, and displays the results of the test data (see cause Instruction Manual ) 6) Point " Print " ie test is completed

6. Precautions : Notes : 1) Some tests ( such as rubber tensile test ) will automatically return to the end of the test beam , and must be set before the test limit distance Limit distance . Otherwise Limit distance After the clip will be damaged and the sensor 2) replacement of parts, and be sure to close the main exit the program, only to replace 3) 2T gantry speed range: 1 ~ 1000mm / min; 3T ~ 5T gantry speed range: 1 ~ 500mm/min 4) When the device is not in use , be sure to turn off the power .